Cisco ASA : Configuring a Hub-and-Spoke IKEv1 IPSec VPN
Cisco ASA : Configuring a Hub-and-Spoke IKEv1 IPSec VPN
The Cisco ASA security appliance integrates a firewall, antivirus software, intrusion detection, and a virtual private network (VPN) into a single unit. It allows for proactive threat defense, preventing attacks from propagating over the network.
A Hub-and-Spoke VPN architecture is an extension of Site-to-Site VPN since it uses two or more Site-to-Site VPN links to connect a Central Hub site to two or more distant branch sites (Spokes). Because the setup on the Spoke ASA firewalls is the same as for Site-to-Site VPN, we will just look at the settings on the Hub ASA device.
![]() |
Fig 1.1- Cisco ASA Site-to-Site Hub-Spoke VPN |
Now let's look at setting up the Hub Site firewall (NDNA_ASA1) to create safe virtual networks (VPNs) between LAN-1, LAN-2 and LAN-3. The setup that differs from the traditional site-to-site VPN is the only one displayed here.
⭐ Step 1: Configure NAT Exemption and Interesting Traffic 📜
Then, from the NAT operation, omit the VPN Interesting traffic
⭐ Step 2: Set up IPSec Phase 1 (ikev1 - ISAKMP) 📜
Configure static tunnel-groups with the Spoke Sites NDNA_ASA2 and NDNA_ASA3
⭐ Step 3: Set up Phase 2 (IPsec) 📜
Configure the Crypto Map and Phase 2 Transform Set now. The two Remote Spoke Sites can be represented by two entries under the same Crypto Map name.
Hub to Spoke NDNA_ASA2
Hub to Spoke NDNA_ASA3
Connect the primary crypto map to the external interface.
Continue Reading...
- Security: Cisco ASA Vs Cisco FTD - The Network DNA
- Site-to-Site VPN: IPSEC Tunnel Between an ASA and a Cisco IOS Router
- Cisco Security: Cisco ASA 5505 Interfaces configuration for Access Ports
- Cisco Security: Cisco ASA 5505 Interfaces configuration for Trunk Port
- Cisco ASA Series 1: Restoring the ASA to Factory Default Configuration
- Cisco ASA Series 2: Configuring NAT
- Cisco ASA Series 3: Easy VPN Remote
- Cisco ASA Series 4: Configuring VLANs and Sub interfaces
- Cisco ASA Series 5: Configuring Threat Detection
- Site to Site IPSec VPN Tunnel between Cisco ASA and Palo Alto Firewalls
More on Cisco ASA...